Volkswagen Listed Cars Have you used SoundRacer in a car model not in our list? Fill in the form and help us get the list more complete. If you do not see your car in the SoundRacer Listed Cars don´t worry! SoundRacer can still work perfectly well in your car, it has just not yet been reported or tested. List of models that we have received positive user reports about.
Volkswagen Polo 2002 2003 2004 2005 factory repair manual, the unique service manual who can help you to maintain, service and repair your Polo! Find great deals on eBay for volkswagen polo manual 2005. Shop with confidence.
Self-Study Programme 251 The Passat, Model Year 2001. • The Passat, Model Year 2001 have previously been described in other This Self-Study Programme summarises the Self-Study Programmes. To enable you to brush design features of the Passat 2001. It provides up your knowledge of specific technologies, we you with information about the various engines have enclosed an index at the back of this SSP. • At a glance Concisely.4 Environmental protection. • The Passat 2001 is based on the highly successful and particularly the bonnet, the wings and the predecessor model.
In revising the vehicle, radiator grille. The bumpers now have full-length Volkswagen's designers retained the rubbing strips. Characteristic basic shape of the saloon, with its distinctive dome roof. • Concisely The rear end has been revised also, including the rear lights. The headlights have clear lenses and the indicator lights are built into the headlights. Solar roof BI-xenon headlights with dynamic headlight range control are also available. Improved crash concept 251_103.
• Concisely Variant The Variant has been revised, too. In addition to the new front-end design, which is identical in the Variant and saloon, the rear end and the rear lights have been redesigned in the Variant. New locking concept with radio wave folding key (fob) built into the driver's door. • Concisely The Passat has a new locking concept.
All models come with radio wave folding keys. There is no lock cylinder on the front passenger's door and the tailgate is separately released. Comfort-enhanced air conditioning system Distance control Spare wheel fitted with ready-for-road tyre 251_104 All technical modifications apply to saloon and Variant. • Concisely Saloon 251_018 2703 mm (2707) 4703 mm (4675) The figures quoted in brackets refer to the predecessor model. 1746 mm (1740) 251_016 Dimensions and weights Model MY 2001 MY 1997 Length 4703 mm 4675 mm Width 1746 mm 1740 mm Height 1462 mm 1459 mm. • Concisely Variant 251_054 2705 mm (2707) 4682 mm (4675) 251_055 251_056 1746 mm (1740) Dimensions and weights Model MY 2001 MY 1997 Length 4682 mm 4675 mm Width 1746 mm 1740 mm Height 1470 mm 1459 mm Wheelbase 2705 mm 2707 mm Turning circle 11.4 m.
• Waste water treatment plant (biological) Volkswagen can look back on a long tradition of protecting the environment. When it built its first - Mittelland Canal and, to date, largest - plant in Wolfsburg, Volkswagen even then thought about ways of using the natural resource of water as economically as possible for example. • Environmental Protection The Emden plant The Emden plant, where the majority of Passat models are built, was the first automobile manufacturing plant in Europe to be certified (in September 1995). The plant was re-audited and re- certified in September 1998. 251_091 West combined heat and power station Procurement of drinking water. • Safety Occupant protection The front airbags Full-size airbags are fitted in the Passat 2001 on the driver's and front passenger's sides.
As in the predecessor model, the airbags have filling volumes of approximately 64 and 120 litres respectively. The central airbag control unit is located behind the central console, above the tunnel.
• Safety As before, the system has two lateral acceleration sensors, located beneath the seats. The lateral acceleration sensors are programmed with a vehicle-specific parameter when they are replaced. Where repair or replacement of defective parts is needed, it is important to specify the correct SP-number. • Safety The belt tensioner/belts Belts and round off the restraint Ball-type tensioners are used in the front seating BELT TENSIONERS system. Standard belt tensioner systems are used positions. In comparison with the predecessor in the outer seat positions, front and rear. Model, they are rotated through 180°.
• Safety Child restraint systems Integrated child safety seats To make use of the integrated child safety seats, the elements of the seat cushion have to be raised and locked in place. An additional shoulder belt guide corrects the belt position for children with a height from 1.3m - 1.5m. • Body Body reinforcements The body of the Passat 2001 was reinforced in the zones described below.
In other words, the body panels have been thickened and the spot welds have been supplemented with laser-welded seams. Roof cross strut B-pillar, right Side member, right. • Body B-pillar, left Side member, left Side member, top left Wheel housing, inner surface (sheet-metal reinforcements have been welded in on the left and right ) 251_041 Side member, top right Tunnel reinforcement Vehicle safety and natural body vibration (40 Hz) have been greatly improved as a result of these modifications. • The engines Engines in general On the following pages, you will find All engines have an electrical throttle control. For descriptions of the engines to be used in the new more effective antitheft protection, the engine– Passat. They include specifications, torque and control unit communicates with the immobiliser performance curves, as well as details of control unit via CAN databus (3rd generation. • The Engines 1.6-litre 75 kW petrol engine The engine is an improved version of the 1.6-litre petrol engine developing 74kW.
The following components were optimised with regard to friction work and mass for higher fuel economy: the conrods ( ) were opti- TRAPEZOIDAL CONRODS mised for mass the piston lands were lowered to reduce pis. • The Engines 1.8-litre 110 kW petrol engine with 5 valves per cylinder and turbocharger The engine was adopted from the predecessor model and adapted to meet the applicable exhaust emissions regulations, as outlined below.
No intermediate shaft Oil pump is chain driven Piston crown cooling via oil spray jet Rod-type ignition coils with integrated output stage. • The Engines 2.0-litre 85 kW petrol engine The 2.0-litre engine was adopted from the predecessor model.
In vehicles which have automatic transmission, an electrical vacuum pump produces the vacuum required for the brake booster (see page 43). 251_031 Specifications Engine code Displacement 1984 cm Type. • The Engines The 2.3-litre 125 kW V-5 petrol engine with 4 valves per cylinder The following modifications have been made to this engine: 4 valves per cylinder valve gear OLLER CAM FOLLOWER UILT UP CAMSHAFT intake and AMSHAFT TIMING CONTROL exhaust camshafts Plastic twin-path intake manifold LECTRIC THROTTLE DRIVE. • The Engines 2.8-litre 142 KW V-6 petrol engine with 5 valves per cylinder The Passat is still powered by the high- performance 2.8-litre V-6 petrol engine. The following improvements were made to this engine: 2 lambda probes were integrated in the exhaust line before the catalyst and after the catalyst.
Baixar Filme Elvira A Rainha Das Trevas Rmvb there. • The Engines 1.9-litre 74 kW TDI engine with pump injection system The 1.9-litre 74 kW TDI engine is based on the 1.9-litre TDI engine developing 85 kW. It differs from the basic engine in the following respects: The software used in the engine control unit was adapted to the lower engine power. • The Engines The 1.9-litre 96 kW TDI engine with pump injection system The 1.9-litre 96 kW TDI engine differs from 1.9- litre 74kW TDI engine with pump injection system in the following respects: The software used in the engine control unit was adapted to the higher engine power. • The Engines The 2.5-litre V-6 TDI engine developing 110 kW The 2.5l V-6 TDI W has ENGINE DEVELOPING demonstrated its success in the predecessor model and will also be used in the Passat 2001 The following technical innovations were employed to improve mixture preparation and reduce exhaust emissions: The number of pump pistons in the radial-piston distributor injection pump was. • Power Transmission Manual gearboxes 5-speed manual gearbox 012/01W The 012 or 01W manual gearbox has a proven service record in the predecessor model. It will be installed as a 5-speed gearbox in combination with all petrol engines and also in the 74 kW diesel engine.
• Power Transmission Automatic gearbox The new Passat is available with the same automatic transmission as in the predecessor model. The design and function of both automatic transmissions have been adopted without change. 4-speed automatic gearbox 01N The 01N four-speed automatic gearbox is notable for: driver- and situation-dependent driving programs, fuzzy logic controlled. • Power Transmission Engine/gearbox combinations Front 4 Motion 1.6-litre ALZ 012 / 01W 1.8-litre AWT 012 / 01W 01 A 2.0-litre AZM 012 / 01W 01 V 2.3-litre AZX 012 / 01W 01 V 01 A 2.8-litre AMX 01 V 1.9-litre AVB 012 / 01W 1.9-litre AVF 01 E. • Running Gear The four-link front suspension is a four-link front suspension. It FRONT AXLE has been is accomodated to the modified vehicle dimensions and axle loads, as compared to the previous Passat.
Bearing bracket Tubular subframe 251_072 The rack-and-pinion steering system The new Passat has as standard. • Running Gear The torsion beam rear axle In the, the spring/ TORSION BEAM REAR AXLE damper settings have been adapted to the modified axle loads.
Shock absorber Wheel bearing unit Coil spring 251_074 Rear axle bearing Modified offset depth Rim offset depth was reduced to 37 mm from 45 mm, with the result that the wheel is now flush with the body exterior. • Running Gear The brakes The front and rear disc brakes are configured for excellent deceleration under braking. New, larger brakes will therefore be used in the new Passat depending on engine type. Front disc brakes 280 x 22 mm 288 x 25 mm 312 x 25 mm Rear disc brakes 245 x 16 mm.
• Running Gear The electronic vacuum pump All petrol engines which have automatic transmission conforming to exhaust emission standard EU4 will have an electrical vacuum pump for brake servos. This pump is required: because not enough vacuum is provided for the brake booster via the intake manifold during the cold-starting phase. • Running Gear Four-wheel drive The double wishbone rear suspension The 4-wheel-drive version of the Passat has a double wishbone rear suspension with a closed The flat-type construction of the rear axle tubular subframe attached to which are the track provides a spacious interior. Control arms for wheel location and the differential. • Running Gear Notes.
• The Electrics The vehicle electrical system is distributed, as in the Passat 97. The fitting locations of the fuse holders, relay carriers, auxiliary relay Airbag control unit carriers and connector stations have been adopted without change. (in gearbox tunnel) The wiring harnesses have been extended to include new systems (solar roof, distance control, dynamic navigation with TV etc.) and the connector stations have been reorganised accordingly.
• The Electrics Window lifter motor with integrated door control unit Control unit for distance control (in luggage compartment on right) TV tuner CD changer Window lifter motor with integrated door control unit 251_003 Dash panel insert with immobiliser control unit and diagnosis interface (Gateway) Connector station. • The Electrics Headlights Standard headlights Two types of headlights are available for the new Passat. The basic specification consists of a clear glass triaxial ellipsoid headlight with a H7 bulb as a high beam headlight. Meghamala Serial Actress Photos. 251_005 High beam Indicator (H7 lamp) lights Low beam Gas discharge lamp (GDL) with.
• The Electrics More light means more safety The Passat, model year 2001, uses the BI-xenon The wider range and increased brightness of the headlight system. The system's improved light beam enable the driver to recognise luminous efficiency provides higher active hazards and reduce speed earlier. • The Electrics Design of a BI-xenon headlight module The headlight module comprises: electronic ballast (EVG) headlight range control motor conventional light bulbs gas discharge headlight module housing with bonded clear glass lens 251_006 251_067 ballast Until now, no single gas discharge headlight has In the high beam setting, the mechanism allows been capable of producing both low and high all of the light generated in the lamp to pass. • The Electrics The shutter screens off part of the light cone generated.
(light/dark boundary) 251_306 The shutter is electromagnetically adjusted to produce the high beam. The entire light cone now becomes effective.
The H7 lamp is also switched on. 251_307 Statutory requirements Where gas discharge headlights are used in a vehicle, the following auxiliary equipment is required to be installed to avoid dazzling other road users. • The Electrics Automatic dynamic headlight range control (LWR) The Passat 2001 with BI-xenon headlights has automatic headlight range control. Task The task of the automatic headlight range control The automatic headlight range control also is to adjust the headlights to compensate for compensates for variation in headlight range variation in ride height as a function of payload. • The Electrics The dash panel insert The dash panel insert is the Group dash panel The dash panel insert is available in three insert with blue backlighting and translucent red versions.
They mainly differ with regard to the dials. Display options in the central display. The modified design and chrome-bezeled instruments stand out. • The Electrics New warning lamps: Designation Symbol Function Selector lever lock K169 serves to remind the driver to depress the brake. The selector lever lock on automatic transmissions is released in this way Door/tailgate open warning indicates open doors/tailgate. In vehicles with a lamps (K116/K123-K127) multifunctional display, this warning is issued as a symbol. • The Electrics Third-generation immobilisation Function The first phase (key recognition) is identical to The engine control unit and the immobiliser that of function immobiliser II.
However, the control unit each calculate a result based on a mode of communication between the engine table of formulae.